New for 2017, the Harley-Davidson® Street Rod™ is set to raise eyebrows and reset expectations. Grown from the Street platform, it’s built to thrive in the city – and provide an exhilarating experience beyond.
The Street Rod carries a host of details guaranteed to provide maximum riding fun. A tuned High Output Revolution™ X 750 engine produces more torque through the mid-range and power at the top-end, and also chases a higher redline. The bigger hitting motor is matched with sharper chassis geometry and aggressive riding position; there are also upgrades to the suspension, brakes and wheels.
In brief, the new Street Rod features:
Dark Custom to the core with something extra all its own…
The Street Rod backs up its upgraded engine and handling performance with a liberal dose of Harley-Davidson Dark Custom styling. Thick, blacked-out forks and triple clamps, topped with a new speed screen (colour-matched to the bodywork except for a black centre insert) add mass to the front end. A new tail section, with perforated rear mudguard, lightens the rear; the taillight is crisp LED, as are the indicators.
The raised ride height and 17-inch wheels inject the Street Rod with an athletic stance, while the new scoop-style air cleaner cover and sharper snap of the exhaust note draw attention to the engine’s strong design.
More midrange torque, top end power and an extra 1,000rpm…
The Street Rod’s liquid-cooled, single OHC 8V 60° V-Twin High Output Revolution X 750 engine produces 18% more horsepower and 8% more torque than the Street 750; peak power arrives @ 8,750rpm, with peak torque delivered @ 4,000rpm. It’s tuned to deliver strongly between 4,000 and 5,000 rpm, with strong midrange performance that a rider can feel and exploit in real-world situations.
Sharper geometry plus new suspension and brakes deliver agile handling
The Street Rod chassis is engineered to match the performance of the engine. The front end features rigid 43mm USD forks gripped by lightweight aluminium yokes. Fork rake is tightened from 32° to 27° for quicker steering response.
New rear shock absorbers feature an external reservoir to increase fluid capacity and maintain damping consistency; travel is increased 31% to 117mm. The swingarm is slightly longer to accommodate the taller shocks, with performance-inspired styling.
A new seat shape is designed to hold the rider firmly in place and seat height is raised to 765mm to enhance the rider’s view forward. The Street Rod also features new forged brake/gear levers plus aluminium rearset footpegs that aid control and make it easier for more riders to get good ground reach when stationary.
The flat, drag-style handlebar creates an aggressive riding position; new bar-end rear-view mirrors can be mounted above or below the grips, and feature a patent-pending design that allows them to fold back without interfering with the rider’s hands.
The Street Rod wears exclusive 17-inch front and rear Open Spoke Black Cast aluminium wheels and new Michelin Scorcher 21 radial tyres, sized 120/70 R17V front and 160/60 R17V rear; dual two-piston calipers and 300mm front disc brakes plus ABS deliver powerful, controlled stopping power. Harley-Davidson’s Smart Security System is standard fitment.
Talking about the exciting new Street Rod, Harley-Davidson Chief Engineer Mathew Weber said: “The Street Rod’s new High Output Revolution X 750 has got hot cams, gas-flowed heads, more compression and a higher redline.”
“It gets your attention. And we wanted a chassis to match, sharp handling and aggressive, perfect for urban cut-and-thrust and canyon carving. Its attitude and the relationship between seat position, rearset footpegs and wide handlebars put the rider fully in control. The fact the Street Rod looks so good – and very close to our early sketches – gives us all a real charge too!”
For more information and availability on the new Street Rod, speak to any member of our sales team at Robin Hood Harley-Davidson.